Sommerfeld’s Tools for Wood – Cabinetmaking Made Easy with Marc Sommerfeld – Part 1

by Robert
Comments are off for this post.
Share Button

Part 1 – Beautiful cabinetry doesn’t have to be difficult. From face frame to hardware installation, Marc covers it all! Marc Sommerfeld’s Tongue & Groove Cabinetmaking System combines the best of Old World joinery with the advantages of New World tooling. The result is a system that will make every joint – and every project – faster, stronger and more accurate. This exciting video shows how this system will work for you – whether you are an occasional woodworker or a seasoned pro. Full video length approximately 105 minutes. Visit http://www.SommerfeldTools.com to find more videos and tools for wood-working.
Video Rating: / 5

Share Button
TedsWoodworking Plans and Projects

Share this article

Comments

  • Elyas Hashemi
    March 9, 2016

    its really useful tools

  • omar rojas
    March 9, 2016

    you did an amazing, easy to use so many machines without video, I'll try to make some cabinets with your method, without worrying about what that single square fit great … shame that some people do not like but that the demonstrative video is for those who know nothing about carpentry (amateur) … helped me a lot. with your abilities to see him easy to do …

  • Keli Brzezinski
    March 9, 2016

    All of my best wood tools I made with woodprix. Google and try it.

  • Lidia Lee
    March 9, 2016

    what type of wood do you use for your face frame and where do you get it?

  • C RAMOS
    March 9, 2016

    He is Steven Segal's father!!

  • Kirk Williams
    March 9, 2016

    Wouldn't Festool Domino joints be much faster and just as good looking for way less time?

  • askme “WHITE NOIZE” itellya
    March 9, 2016

    very nice series, easily followed along in making my own cabinets. What router are you using ? the O ring trick, is it just any type of O ring that will fit in the bottom of the collar?

  • TSpike73
    March 9, 2016

    I predict this newfangled fancy tongue and groove thing is just a fad among them youngsters, it'll never catch on…

  • Ono Udont
    March 9, 2016

    Blah blah blah. Like you just invented it. FUCK OFF

  • Luckystrike
    March 9, 2016

    If I was going to set up as a cabinet builder or build my own I'd buy your tools, great system.

  • Idzwan Fikri
    March 9, 2016

    I've been quietly using this software for the past 2 months to build my outdoor woodworking projects! See my comment below to download the software.

  • thefeet
    March 9, 2016

    VERY WELL put together video series. Probably the best teacher I have found on youtube for building GOOD QUALITY cabinets! The two videos ARE lengthy but Marc spares no details and I learned a few new tricks from watching this series. I totally recommend this video series if you want to build serious cabinets. Nice job Marc. Thank you. It's nice to see the way you teach. You explain the details that most every other instructional videos tend to omit. Although I will most likely build mine a bit differently, I definitely learned some valuable tips here and I like the idea of tongue/groove joinery since it is so strong! I will be building my kitchen island using this method and KNOW it will be STRONG! Awesome job on the videos!

  • s Buzz
    March 9, 2016

    all t and g except ????pocket screws

  • Russell St.Clair
    March 9, 2016

    tounge and groove is 1 of the oldest techniques there is .If you learned by face nailing you started off as a carpenter no cabinet maker face nails they know that it lowers the value of the workmenship. Cabinets and fixtures are 1/4 -1/3  the cost of building a home cheaply built cabinets are a negative to the value of the home . We're trying to make money not pay more to build less.

  • chuckstermania
    March 9, 2016

    I used this method, and his bits, to make a full set of kitchen cabinets. This was my first set and they turned out great. They are a little more expensive because you use 3/4" plywood for the cabinet. The process is so simple even an engineer like me can do it.

  • Thad ward
    March 9, 2016

    New method?? Tongue and Groove ?? He should of just said "were going to use tongue and groove today" not "we've got this new method" like you just came up with it. Tongue and groove is as old as the saw.

  • jeffswert
    March 9, 2016

    Really dude? Dissing someone's pocket hole technique and then using it? You're a tool.

  • Joseph Usher
    March 9, 2016

    Enough with mysecretblueprints. com!!! It's a SCAM just like all the rest! So get that shit out of here! This is no place for crooks.

  • A K Bharadwaj
    March 9, 2016

    Nice to see cabinet making method.