Make a Magazine Rack – Lots of cool woodworking tips!

by Robert
Comments are off for this post.
Share Button

I decided to do a simple project for the beginners out there, it’s a magazine rack. This one will be used as a menu stand, but works for just about anything that’s a similar shape. I demonstrate using a variety of tools, but most can be substituted for more common tools.
Video Rating: / 5

This is a quick video showing how i cut some small peices of wood on the table saw with a wide blade opening. what i did was put some tape over the blade opening and then with the saw on raised the blade up through the tape to creat a zero clearence opening. this was so that the wood would not lean into the blade and creatw a dangeros situation. however use this tipo at your own risk because it did shoot a peice back at me once i did not get hit but i gave me a good scare so allways read your safty manual and used your equipment properly to help reduce the risk of injury.woodworking tips
Video Rating: / 5

Share Button
TedsWoodworking Plans and Projects

Share this article

Comments

  • DQS_78
    June 26, 2016

    cool bro..

  • Janne Kronbäck
    June 26, 2016

    Fantastic. I watched tbrough the Drunkwn woodworker videos a couple of months back, and saw that dangerous clip featured. It was really fun to now unexpectedly run into in mid-video. :)

  • Jim Borg
    June 26, 2016

    tak for di du brugte tid på at svare mig og tak for dit råd
    venlig hilsen jim borg

  • Jim Borg
    June 26, 2016

    hello my name is Jim and I live in Denmark, I would just say thank you for a very instructive vidio you've made, I'm trying to get made a small woodshop but I lack the very tool so if you have something that you do not use or gone pieces so you may send it to me, I will be very thankful as I am arbedsløs the moment but hope that there are some that will help me start up.
    Sincerely, Jim castle
    Denmark
    source Vænget 1
    skanderborg 8660

  • hasdrubal121
    June 26, 2016

    Nice job, thanks for sharing. I'm really enjoying going through your vids. You're giving me lots of ideas, thanks

  • Stupidjeep84
    June 26, 2016

    Nice video, thanks for sharing. I just subscribed to your channel.

    I was cracking up when you used the most dangerous method you could think of to round over the extra braces. My girlfriend saw me laughing and told me that she's seen me doing that before. I'll get a router table one day. 

  • jonessaddle
    June 26, 2016

    I made a kitchen island and a dining room table this week using your finishing method and they both turned out great. Thanks again.

  • CrisTooR
    June 26, 2016

    Been watching all of your videos in the past few days. Thank`s a lot! I got looking for tiny home video as I am seriously looking into building my own. I'd like to see more tiny home videos 🙂 All your videos are great, will see how your channel turns in a few years 🙂 Keep up the good work! It's impressive. :)

  • Robert Ketteringham
    June 26, 2016

    NICE JOB FINECUTES

  • joesjigs
    June 26, 2016

    Excellent as always ! JOE

  • Keith Peters
    June 26, 2016

    Surely this video needs a disclaiimer of some kind.

  • Darbin Orvar
    June 26, 2016

    Have to agree with David – best line yet!

  • Make Something
    June 26, 2016

    "I"ll new demonstrate the most dangerous way I can route the groove." Best line yet in a woodworking YouTube video.

  • Super1topdog
    June 26, 2016

    Ha the most dangerous way you could think of. Classic, my grandfather made a router table in his work table and just raised the router up when he needed to use it.

  • frangitofrangito
    June 26, 2016

    What make of jointer are you using? I've never seen one that small before! Thanks! 

  • peterhall30004
    June 26, 2016

    i liked the most dangerous part – made me laugh

  • Ed Draper
    June 26, 2016

    Always nice to see project videos!  I'd be interested in seeing your sharpening technique.

  • Jay Bates
    June 26, 2016

    ▶ Make a Magazine Rack – Lots of cool woodworking tips! – YouTube http://buff.ly/1q0NXhW

  • jonessaddle
    June 26, 2016

    Very Nice I really like the finish.

  • GiddyUp994
    June 27, 2016

    Great project. Thank you for sharing it with us.
    Derek

  • Jon Hammond
    June 27, 2016

    Why not just make a table saw sled?

  • 88rollins
    June 27, 2016

    Cause who really needs ten fingertips?

  • Kory James
    June 27, 2016

    Wow. You should never remove off cuts while the blade is running. Made me cringe.

  • dghohens
    June 27, 2016

    3:16 what are you doing man?!?!? That's a good way to lose a finger!

  • Said Choucair
    June 27, 2016

    Please don't put your finger near the blade… Thanks…

  • Burnt Taco
    June 27, 2016

    Appreciate the tips! 🙂 thank you!