Back in stile

by Robert
Comments are off for this post.
Woodworking Plans Banner
Share Button

Remember the hanging wall cabinet? Well it still doesn’t have any doors or drawers – so let’s remedy that situation.  I decided the door fronts would be first, and why not amp it up a bit with through haunched tenons. I love haunched tenons because they let me cut all the grooves straight down all the rails and stiles on the router table without having to square anything off with hand tools.  But they do add an extra level of difficulty to the tenon construction. So I’ll show you a way I quickly measure out the haunches and cut them with a hand saw.

And with stiles just an inch wide, I was worried shorter tenons might not be strong enough. So I decided to just run the mortises all the way through the stock. Top it off with some raised cherry panels for effect, I think these door fronts will really complement the hanging wall cabinet. Which reminds me, I need to start looking for some hinges pretty soon. Enjoy!


The Bois Shop

Share Button
Woodworking Plans Banner

Share this article

Comments are closed.